Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Engine Mechanical
Model Year: 2008 Model: Sequoia Doc ID: RM0000031RK005X
Title: 3UR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL

(a) Apply MP grease to the lip of a new oil seal.

(b) Using SST and a hammer, tap in the oil seal to a depth between 0 to 1.0 mm (0 to 0.0394 in.) from the timing chain cover edge.

SST: 09223-22010

SST: 09506-35010

NOTICE:

  • Keep the lip free from foreign matter.
  • Do not tap the oil seal at an angle.

2. INSTALL CRANKSHAFT TIMING GEAR KEY

(a) Install the crankshaft timing gear key.

3. INSTALL CRANKSHAFT PULLEY

(a) Align the pulley set key with the key groove of the pulley, and slide on the pulley.

(b) Using SST, install the pulley set bolt.

SST: 09213-70011

09213-70020

SST: 09330-00021

Torque: 300 N·m (3059 kgf·cm, 221 ft·lbf)

4. INSTALL FRONT STABILIZER BAR

(a) Install the stabilizer bar and install the 2 stabilizer bushes and 2 stabilizer brackets with the 4 bolts.

Torque: 69 N·m (704 kgf·cm, 51 ft·lbf)

5. INSTALL RADIATOR ASSEMBLY

(a) Install the radiator assembly 3UR-FE COOLING: RADIATOR: INSTALLATION (2008 Sequoia) .

6. INSPECT FOR OIL LEAK